Menu
(Chief Executive Office, Solution Biologics Sdn. Bhd.)
(Senior Vice President & Chief Executive Officer, PETRONAS Refinery & Petrochemical Corporation Sdn. Bhd.)
(Secretary General, Ministry of Environment and Water)
1004 – Prediction of temperature distribution during microwave heating by three dimensionless numbers by Ryohei Yakata and Yusuke Asakuma | Chemical engineering fundamentals
1018 – Refractive index measurement of glucose aqueous solution during microwave irradiation by Sota Koreeda and Yusuke Asakuma | Chemical engineering fundamentals
1005 – Study for hydration structure in sodium chloride solution through refractive index during microwave irradiation by Tomoisa Maeda and Yusuke Asakuma | Chemical engineering fundamentals
1024 – Design of Single-Atom and Frustrated-Lewis-Pair Dual Active Sites for Direct Conversion of CH4 and CO2 to Acetic Acid by Tao Ban and Chun-Ran Chang | Reaction engineering and catalyst
1007 – Maintenance of surfactant desorption by changing microwave irradiation mode by Yusuke Watanabe and Yusuke Asakuma | Chemical engineering fundamentals
1026 – Effect of Rb promoter on Fe3O4 microsphere catalyst for CO2 hydrogenation to light olefins by Zhongtao Sun, Yi Zhang, Xin Chen and Fangxu Lu | Reaction engineering and catalyst
1009 – Non-thermal effect for refractive index of water during pulse microwave irradiation by Takahiro Takai and Yusuke Asakuma | Chemical engineering fundamentals
1027 – The state of Pt active phase and its surrounding environment during dehydrogenation of ethane to ethylene by Yakun Zhang, Baocheng Qiu and Yi Zhang | Reaction engineering and catalyst
Chemical Engineering Solutions for a Sustainable Future
1217 – Material Selection for Sweet Gas Production Pipeline: Application of Analytic Hierarchy Process and Failure Mode and Effects Analysis by Kaye Anne Simeon, Edcel Iolo Maramag, Alyssa Jean Olvina, Michael Angelo San Jose, Jonas George Arcilla, Karl Patrick Garcia, Shiela Mae Amilbangsa and Jonathan Jared Ignacio | Process safety and loss prevention | Venue: MR 302
Complementary skills of a Chemical Engineer in an ever challenging world | Venue: MR 303
1070 – DETERMINATION THE EXTENT OF ACID AND BASIC CONDITION DEGRADE LDPE AS COMPATIBILIZER IN LDPE KENAF COMPOSITE by Chong Yu Low, Tin Sin Lee, Soo Tueen Bee and Xin Khai Ng | Reaction engineering and catalyst | Venue: MR 306
1181 – Valorization of durian biomass waste into biochar-derived supercapacitor electrode materials by Jin Voon Poi, Jia Ying Chua, Kien Ming Pen and Kian Fei Yee | Cleaner production and circular economy | Venue: BR 2
Process Safety Management – A Primer | Venue: MR 302
1106 – Partition coefficient of a new odorant, 2-hexyne, in liquefied petroleum gas cylinder by Tomoya Tsuji, Peck Loo Kiew and Taka-Aki Hoshina | Chemical engineering fundamentals | Venue: MR 303
1094 – Ultra-deep denitrogenation of model fuel by oxidation over sulfated geopolymer catalyst followed by extraction with water by Snehlata Kumari and Sonali Sengupta | Reaction engineering and catalyst | Venue: MR 306
1008 – Important factors for modification of liquid-liquid interface during microwave irradiation by Yusuke Watanabe and Yusuke Asakuma | Chemical engineering fundamentals | Venue: BR 1
1182 – A study on green and sustainable conversion of coffee ground waste into activated carbon via novel advanced self-activation approach by Khai Shern Andersson T’Ng, Yoven Khor, Shu Wen Chang, Ke Ming Lim, Jing Brenden Su and Kian Fei Yee | Cleaner production and circular economy | Venue: BR 2
1134 – Real-time Data Conditioning for Process Operations: Application to a Spray Dryer by Faiezin Osmas, Yong Han Pua, Ming Tan Tham and Wean Sin Cheow | Process system engineering | Venue: MR 305
1201 – Analysis of Cashew (Anacardium Occidentale) Nut Shell as Waste-derived Lost Circulation Material for Water-based Drilling Fluids by Sanmel Cambarijan, Lianne Mican Lloren, Gladys Joyce Lomibao, John Christian Paderna, Shiela Mae Amilbangsa and Jonathan Jared Ignacio | Chemical engineering fundamentals | Venue: MR 302
1014 – FABRICATION AND EVALUATION OF GAS BARRIER PERFORMANCE OF POLYINDENE MEMBRANES BY RF-PECVD by Myat Kyaw, Nathaniel Dugos, Shinsuki Mori, Susan Roces and Arnel Beltran | Chemical engineering fundamentals | Venue: MR 303
1095 – Study of the oxidation reaction of dibenzothiophene with sulfated geopolymer catalyst by Snehlata Kumari, Biswajit Saha and Sonali Sengupta | Reaction engineering and catalyst | Venue: MR 306
1016 – Development of a ZrO2-Coating Technique by a Sol-Gel Process by Akira Miwano, Takehiro Yonezawa, Noriko Yamauchi, Kouichi Nakashima and Yoshio Kobayashi | Chemical engineering fundamentals | Venue: BR 1
1189 – Production of biodiesel fuels (BDF) from waste edible oils with fluctuating properties using batch-type equipment by Aya Kaide and Takashi Saeki | Cleaner production and circular economy | Venue: BR 2
1055 – LATEST DEVELOPMENTS IN MICROALGAE TECHNOLOGY by Pau Loke Show | Chemical engineering education | Venue: MR 305
Beyond Traditional Behavioural Safety | Venue: MR 302
1015 – Physicochemical properties of emulsified d-limonene spray-dried powder by Shisei Takashige, Afroza Sultana, Hermawan Dwi Ariyanto and Hidefumi Yoshii | Chemical engineering fundamentals | Venue: MR 303
1162 – Effects of operational differences in palm oil mills on Palm Oil Mill Effluent (POME) characteristics by Mohd Amran Mohd Yusof and Chan Yi Jing | Sustainable palm oil | Venue: MR 306
1045 – Technical Analysis for the Use of an ESP Combined with Packing Tools for an Artificial Lifting System by Juan Carlos Cordova Suarez, Alexander Albuja, Enrique Barreno and Cordova Suarez Manolo Cordova | Chemical engineering fundamentals | Venue: BR 1
1196 – Comparative Life Cycle Assessment on the Utilization of Biopolymer-based Biosorbent for Copper Removal in Wastewater Treatment by Kening Qin and Weng Hoong Lam | Cleaner production and circular economy | Venue: BR 2
1034 – Activity and stability of unsupported and supported aluminum catalyst for lactic acid esterification with 1-butanol by Kanungnit Chawong, Sunisa Singhawannurat and Panarat Rattanaphanee | Reaction engineering and catalyst
1049 – Fabrication and characterization of PLA/HA scaffold by combined of freeze-drying and particulate leaching method for bone tissue engineering by Sunisa Singhawannurat and Panarat Rattanaphanee | Nanotechnology and advanced materials
1054 – Recovery of high concentration of amino acids by subcritical water treatment of residuals from vinegar production by Daigo Murakami, Shoji Hirayama, Yuriko Hoshino, Munehiro Hoshino and Mitsuru Sasaki | Reaction engineering and catalyst
1076 – Production of chain oligopeptides from diketopiperazine by pulse discharge method by Ryo Yamada and Mitsuru Sasaki | Bioproducts, food and bioprocessing
1080 – Graphene-based catalysis for conversion of marine-based feedstocks under microwave irradiation by Sumire Ichimaru | Reaction engineering and catalyst
1082 – Glycerol conversion to GTBE using graphene oxide under microwave irradiation by Yuri Ogasawara, Armando Quitain, Tetsuya Kida and Yusuke Inomata | Reaction engineering and catalyst
1088 – Preparation conditions of Pickering emulsions stabilized by antibacterial silver nanoparticle via ultrasonication by Yumeto Kashiwazaki, Yusuke Horiki, Jun Sawai, Kazumitsu Naoe and Masanao Imai | Nanotechnology and advanced materials
1109 – Stearate Liquid Marbles for Bacterial Cellulose Production: Preparation conditions of Bacterial Cellulose by Satoshi Honjo, Airi Hirobe, Kazumitsu Naoe, Masanao Imai and Jun Sawai | Bioproducts, food and bioprocessing
1113 – Carbon dioxide absorption effect on electric conductivities for aqueous solution of 2-aminoethanol, 2-(methylamino)ethanol, and 2-(butylamino)ethanol at 313.2 K by Taka-Aki Hoshina, Kento Fujita, Masaki Okada, Tomoki Takahashi, Tomoya Tsuji and Hidetaka Yamada | Reaction engineering and catalyst
1131 – Open cultivation of microorganisms in Pickering emulsions stabilized by stearate microparticles by Muhammad Waffieq Syarafuddin Mazlan, Sayu Hanibuchi, Yuka Tokoro, Kazuma Aiki, Jun Sawai, Kazumitsu Naoe and Masanao Imai | Bioproducts, food and bioprocessing
1028 – An active and stable nickel-based catalyst with embedment structure for CO2 methanation by Yiming Chen, Baocheng Qiu and Yi Zhang | Reaction engineering and catalyst
1030 – Hierarchical Nickel/Iron-Layered Double Hydroxide Ultrathin Nanosheets in Situ Grown on Nanocarbon Networks for Enhanced Oxygen Evolution Reaction by Xiong Yin, Hongwei Shi, Yani Hua and Zhan Gao | Nanotechnology and advanced materials
1029 – Homogeneous and highly dispersed Ni-Ru on a silica support as an effective CO methanation catalyst by Zhanggui Hou, Yi Zhang, Wei Sheng and Yi Liu | Reaction engineering and catalyst
1061 – Hydrothermal Synthesis of Gallium-based Spinel Oxide Nanoparticles with Different Metal Ion Composition Ratios by Bo Xie, Chiya Numako, Takashi Naka and Seiichi Takami | Reaction engineering and catalyst
Multi-Objective Pinch Analysis
1021 – Release characteristic of 1-methylcyclopropene from coated paper containing 1-MCP inclusion complex in α-cyclodextrin by Hermawan Dwi Ariyanto, Vita Paramita, Hidefumi Yoshii | Chemical engineering fundamentals | Venue: MR 302
1023 – FACILE SYNTHESIS OF MAGNETIC LIPASE/CU3(PO4)2 HYBRID NANOFLOWER FOR BIOCATALYTIC APPLICATIONS by Shamini Anboo and Lau Sie Yon | Bioproducts, food and bioprocessing | Venue: MR 303
1120 – Low-loading platinum alloy electrocatalyst supported on hollow carbon for the four-electron oxygen reduction reaction by Lee Youngbin, Im Kyungmin and Kim Jinsoo | Reaction engineering and catalyst | Venue: MR 306
1175 – Influence of osteopontin on calcium oxalate crystallization in artificial urine by Sevgi Polat and H. Burak Eral | Chemical engineering fundamentals | Venue: BR 1
1093 – Preparation of Macroporous Pectin Particles with High Specific Surface Areas and Interconnected Pore Networks for Enhancement of Protein Adsorption Capacity by Tue Tri Nguyen, Kiet Le Anh Cao, Tomoyuki Hirano and Takashi Ogi | Nanotechnology and advanced materials | Venue: BR 2
1042 – Phase equilibrium measurement and thermodynamic correlation of polybutadiene and dichloromethane mixture by Ianatul Khoiroh and Tommy Hoong Wy Lee | Chemical engineering fundamentals | Venue: MR 302
1085 – Activation of lipase by the hydration-aggregation method and its application to triglyceride modification in nonaqueous media by Taichi Yoshioka and Takashi Kuroiwa | Bioproducts, food and bioprocessing | Venue: MR 303
1104 – A Highly Stable W-doped TiO2 Supported Pt Electrocatalyst for Oxygen Reduction Reaction in Acidic Media by Toan Minh Pham, Kyungmin Im and Jinsoo Kim | Reaction engineering and catalyst | Venue: MR 306
1250 – Distribution of microplastics in the sediments of Baseco port area at Manila Bay, Philippines by Lynne Jerisa Castro, Araceli Monsada and Kathlia Cruz | Chemical engineering fundamentals | Venue: BR 1
1097 – Investigation of densified spherical and submicron-sized FeNi particles on their magnetic characteristics by Eka Lutfi Septiani, Kiet Le Anh Cao, Tomoyuki Hirano, Nobuhiro Okuda, Hiroyuki Matsumoto, Yasushi Enokido and Takashi Ogi | Nanotechnology and advanced materials | Venue: BR 2
Biocrystallisation for Process Intensification of Downstream Bioprocessing
1020 – Process Integration for Bioenergy Generation by Dominic Foo | Process system engineering | Venue: MR 305
1046 – Synthesis of Natural Blue dye from Butterfly Pea (Clitoria ternatea) flowers and its application on Cotton fibres using Ultrasonic-assisted techniques by Terrence Yap Ming Jiet and Vasanthi Sethu | Chemical engineering fundamentals | Venue: MR 302
1098 – Design of an iron, cobalt, and nitrogen co-doped carbon catalyst for enhanced high oxygen reduction reaction performance derived from metal-organic framework and conducting polymer complexes by Quoc Hao Nguyen, Jinsoo Kim and Kyungmin Im | Reaction engineering and catalyst | Venue: MR 306
1235 – Adsorption of Paraquat at High Concentration in Synthetic Wastewater by Using TiO2-Coated on Grain Activated Carbon from Coconut Shell by Korawit Maneeyot and Nuttapol Lerkkasemsan | Chemical engineering fundamentals | Venue: BR 1
1101 – Extraction of Methyl Phenol in Selangor River using Solid Phase Extraction Technique Coupled with UV-Vis Spectrophotometry by Noorashikin Saleh and Nur Izzah Ahmad Juanda | Waste treatment and management | Venue: BR 2
1040 – A P-Graph Approach to Water Use Optimization in a Fish Processing Industry through Resource Conservation Networks with Material Interception by Marc Joshua Abad, Andrew Felix Go, Clyde Austin Chua, Kathleen Aviso and Arnel Beltran | Process system engineering | Venue: MR 303
Academic vs industrial research: SWOC | Venue: MR 302
1111 – Synthesis of MOF-808/PEBAX mixed-matrix membranes for CO2/N2 separation with different sizes of MOFs by Lim Semin, Jeong Sungkuk and Kim Jinsoo | Reaction engineering and catalyst | Venue: MR 306
1137 – Determination of Peclet number from flow visualization inside an extraction column of “emulsion-flow type” by Ming Zhang, Mikiro Hirayama, Kei Mizuta and Susumu Nii | Chemical engineering fundamentals | Venue: BR 1
1170 – 3D-Printed PEGDA Monolith with Robust Silane-Grafted Chitosan for Enhanced Textile Wastewater Treatment: Response Surface Methodological Approach by Nurul Husna Mohd Yusoff, Chien Hwa Chong, Voon-Loong Wong, Kean How Cheah and Yoke Kin Wan | Waste treatment and management | Venue: BR 2
1062 – Synthesis and optimization of multilevel mixed refrigerant systems using generalized disjunctive programming by Fahad Matovu and Shuhaimi Mahadzir | Process system engineering | Venue: MR 305
1171 – Development of a Comprehensive Screening Method of Deep Eutectic Solvents for the Separation of Toluene-Heptane Mixtures by Hanee Farzana Hizaddin, Fildza Amirah Khalit and Aisyah Ilyani Ismail | Chemical engineering fundamentals | Venue: MR 302
1089 – Synergistic antifungal activity by combining amphotericin B with lipidated chitinase by Pugoh Santoso, Kosuke Minamihata, Yugo Ishimine, Taniguchi Hiromasa, Takuya Komada, Ryo Sato, Masahiro Goto, Tomoya Takashima, Toki Taira and Noriho Kamiya | Bioproducts, food and bioprocessing | Venue: MR 303
1249 – A quick and contactless analysis of powder mixing conditions using a shear-sensitive coloured tracer by Vikram Karde, Marv J. Khala, Colin Hare and Jerry Y. Y. Heng | Chemical engineering fundamentals | Venue: MR 306
1002 – INTEGRATING ENGINEERING ETHICS INTO CHEMICAL ENGINEERING CURRICULUM USING CDIO FRAMEWORK by Sin Moh Cheah | Chemical engineering education | Venue: BR 1
1019 – Virtual Reality Enhanced Education for Undergraduate Chemical Engineers by Swee Kun Yap, Cindy Lee Lai Yeng, Henry Dass Selvaraj, Sachin V. Jangam and Suraj Vasudevan | Chemical engineering education | Venue: BR 2
1158 – A comparative analysis on the performances of four different In-ground Lagoon Anaerobic Digester in the treatment of Palm Oil Mill Effluent (POME) by Mohd Amran Mohd Yusof and Yi Jing Chan | Sustainable palm oil | Venue: MR 305
1193 – A New Invention on Energy-Saving High Efficiency Mixer For The Industrial Scale Practice by Zauyah Zamzam and Yoshikazu Kato | Chemical engineering education | Venue: MR 302
1107 – Torrefaction of Olive Jift Biomass with Low Density Polyethylene (LDPE) Plastics and Their Interactive Effects by Mintallah Mousa A Allouzi, Suchithra Thangalazhy-Gopakumar, Suyin Gan and Lai Yee Lee | Reaction engineering and catalyst | Venue: MR 303
1116 – Spray pyrolysis-derived atomically dispersed hollow spherical bimetallic(Co, Fe) electrocatalysts with improved stability for Oxygen Reduction reaction in acidic media by Sion Oh, Kyungmin Im, Sungjong Yoo and Jinsoo Kim | Reaction engineering and catalyst | Venue: MR 306
1010 – Optimization of hydrodynamic parameters for CO2 absorption in Rotating Packed Bed by Abdul Zahir, Perumal Kumar, Agus Saptoro, Angnes Ngieng Tze Tiong, Samreen Hameed and Milin Shah | Process system engineering | Venue: BR 1
1096 – Gas-phase Oxidation of Benzene over Cu Catalyst Loaded on MFI Type Molding Zeolite by Xindong Yin, Shuhei Miyamoto, Keita Taniya, Yuichi Ichihashi and Satoru Nishiyama | Reaction engineering and catalyst | Venue: BR 2
1138 – Continuous separation of submicrometer-sized particles using microfluidic devices integrated with porous substrate as sieving matrices by Runa Hemmi, Takeru Sato, Masumi Yamada and Minoru Seki | Reaction engineering and catalyst | Venue: MR 305
Energy Efficiency Gains in Process Plants | Venue: MR 302
1036 – Evaluation of Antifungal Activity of Magnesium Oxide Nanoparticles on Fusarium oxysporum by Jia Le Wee, Ming Chiat Law and Yen San Chan | Nanotechnology and advanced materials | Venue: MR 303
1006 – Adsorption and Separation of CO2/CH4 in Activated Carbon by Allan Hua Heng Sim and Chunyan Fan | Process system engineering | Venue: BR 2
1150 – Effect of anode catalyst layer improvement on mass transport and performance of Direct Formic Acid Fuel Cell by Madihah Miskan, Takuya Tsujiguchi, Akio Kodama and Yugo Osaka | Reaction engineering and catalyst | Venue: MR 305
1133 – Numerical simulation of polymer melt flow and solidification in an injection molding filling process by Junya Takayoshi, Yasunori Okano, Yuhsuke Hamano and Gen Aoki | Process system engineering | Venue: MR 302
1081 – Molybdenum containing carbon nanofiber supported palladium catalyst for formic acid electrooxidation reaction by Fahimah Abd Lah Halim, Takuya Tsujiguchi, Yugo Osaka and Akio Kodama | Nanotechnology and advanced materials | Venue: MR 303
1043 – SCEJ’s actions in line with the Sapporo Declaration for achieving the SDGs by Satoko Fujioka | Chemical engineering education | Venue: MR 306
1077 – Exploration of L-tryptophan assisted desalination process in a simulated porous media environment by Amirun Nissa Rehman, Muhammad Saad Khan, Bhajan Lal, Iqbal Ahmed, Hani Abulkhair, Azmi Mohd Shariff, Abdulmohsen Alsaiar, Eydhah Almatrafi and Omar Bagama | Bioproducts, food and bioprocessing | Venue: BR 1
1038 – Modeling and simulation of SBR and digester performance using GEKKO by Carlo Galicia | Process system engineering | Venue: BR 2
1164 – Development of a novel Cu-based dual function material for CO2 Capture and Hydrogenation by Rim Ismail, Mohammed Ali Saad, Ali Sardar, Muftah El-Naas and Abdelbaki Benamor | Reaction engineering and catalyst | Venue: MR 305
1149 – USAGE OF BIOMASS GASIFIER FOR DRYING SOAKED PADDY IN A REVERSIBLE AIRFLOW FLATBED DRYER: ARTIFICIAL NEURAL NETWORK MODELING by Senthil Kumar Arumugasamy | Process system engineering | Venue: MR 302
1190 – Removal of Inhibitor Compounds from Monosaccharides by Nanofiltration using a Thin-Film Nanofibrous Composite Membrane by Glebert Dadol and Noel Peter Tan | Nanotechnology and advanced materials | Venue: MR 303
1047 – Fostering Business for Sustainable Developments With Engineering Knowledge by Chuan Zhen Ko | Chemical engineering education | Venue: MR 306
1092 – Microencapsulation of extracted holy basil oil in modified starch by spray drying by Artima Lairattanakul, Suvimol Surassmo, Uracha Ruktanonchai and Apinan Soottitantawat | Bioproducts, food and bioprocessing | Venue: BR 1
1059 – Engineering Terephthalic Acid Product from Recycling of PET Bottles Waste for Downstream Operations by Jing Cheng Wang, Hung Lin Lee, Chi Wen Chiu and Tu Lee | Process system engineering | Venue: BR 2
1165 – Rhodium Promoted Bimetallic Dual Functional Material for Integrated Co2 Capture and Conversion by Areeg Tageldin, Mohammed Ali Saad, Sardar Ali and Abdelbaki Benamor | Reaction engineering and catalyst | Venue: MR 305
Rise of hybrid modeling in industrial process simulations | Venue: MR 302
1248 – Shell waste based functionalised coatings for generating superhydrophobic surfaces by Vikram Karde, Christopher R. Cheeseman and Jerry Y. Y. Heng | Chemical engineering fundamentals | Venue: MR 303
1050 – Transition pathway towards 100% renewable energy across the sectors of power, heat, transport, and desalination for the Philippines by Joey Ocon | Cleaner production and circular economy | Venue: MR 306
1117 – Fabrication of glyco-immobilized fluorescent PMMA particles encapsulating magnetically responsive Fe3O4 particles by Noriko Yamauchi, Yosuke Noshiro, Shohei Tada, Makoto Ogata and Yoshio Kobayashi | Bioproducts, food and bioprocessing | Venue: BR 1
1159 – Design and Simulation of Pressure Retarded Osmosis for Hydroponics Fertigation by Riezqa Andika and Mark Philip Purba | Process system engineering | Venue: BR 2
1173 – Development of novel method for selective conversion of dibutyl phosphate into phospholic acid with the vapor-phase pulsed discharges by Natsuko Tashiro and Mitsuru Sasaki | Reaction engineering and catalyst
1225 – High-voltage stable solid-state lithium battery based on the nano-conductor imbedded flexible hybrid composite solid electrolyte with hyper-ion conductivity and thermal, mechanical, and adhesive stability by Hai Anh Hoang and Dukjoon Kim | Nanotechnology and advanced materials
1123 – Preparation of bacterial cellulose membrane via liquid marble method and its water permeation behavior by Retsu Nakamura, Hiroaki Okano, Nobuyuki Matsuda, Jun Sawai, Kazumitsu Naoe and Masanao Imai | Bioproducts, food and bioprocessing
1105 – Synthesis of Low-Pt-Based Electrocatalyst Derived from Porous MOF-808(Zr)-NH2 Nanoparticles Towards Oxygen Reduction Reaction by Toan Minh Pham, Kyungmin Im and Jinsoo Kim | Reaction engineering and catalyst
1108 – Spray pyrolysis-assisted synthesis of Ruthenium doped MoO2 sphere for high mass activity of hydrogen evolution reactions over a wide pH range by Yoonmo Koo, Kyungmin Im and Jinsoo Kim | Reaction engineering and catalyst
1099 – Synthesis of Co9S8@NC Hollow Nanocages from composite of Metal-Organic Framework and polypyrrole and their application for water splitting by Quoc Hao Nguyen, Jinsoo Kim and Kyungmin Im | Reaction engineering and catalyst
1115 – Spray Pyrolysis-Derived Hollow CoFe-NC@CNT Electrocatalyst with Improved Stability and Activity for Oxygen Reduction Reaction by Sion Oh, Kyungmin Im and Jinsoo Kim | Reaction engineering and catalyst
1255 – Techno-economic and environmental assessment of ultraviolet crosslinked fish scales gelatin nanofibers for wound healing by Siew Shee Lim, Christopher De Sheng Wong, Rui Hong Teoh, Ming Xiang Hor, Jia Rhen Loo, Raymond Girard R. Tan and Dominic Foo | Cleaner production and circular economy
1258 – Heat Recovery of Milk Powder Production With Recirculation of Exhaust Air by Yick Eu Chew, Wei Wen Wee, Timothy Walmsley and Dominic Chwan Yee Foo | Process system engineering
1219 – Transparent freestanding Ti3C2Tx MXene conductive film for surface-functionalized electromagnetic wave shielding and electronic materials using polar aprotic organic solvent by Byoung Wan Lee, Bongjun Choi, Seamin Park and Young-Seok Kim | Chemical engineering fundamentals
1222- Effective radiative cooling of dark-tone paints prepared by near-infrared reflective pigments by Jin Su Hwang, Kyeong Youl Jung and Young-Seok Kim | Chemical engineering fundamentals
1064 – Simulation of CO2 capture from flue gas of a power plant by a three-bed nine-step vacuum pressure swing adsorption process by Chun-Hsiang Chang, Liang-Yi Su, Chih-Yao Tseng, Cheng-Tung Chou, Ming-Wei Yang, Zong-Yu Zhuang and Hung-Chen Chang | Process system engineering
1100 – Energy saving of fluid transportation of ground thermal energy system by drag reducing effect by Takashi Saeki, Aya Kaide and Shigeyuki Nagasaka | Cleaner production and circular economy
Sustainable chemical processes from inherent perspective
ArborXD : Empowering Carbon Conscious Decision Making | Venue: MR 302
1203 – Mechanistic Understanding of the Filter Cake Characteristics of Water-based Drilling Fluids with Waste Coconut Husks using 2k Factorial Design by Shiela Mae Amilbangsa, Joshua Guzman, Prince Panes, April Faye Molina and Jonathan Jared Ignacio | Oil, gas & petrochemicals | Venue: MR 303
1103 – Design of Bio-oil/Solvent Blend with Economic Considerations Using Computer Aided Molecular Design by Jia Wen Chong, Lik Yin Ng, Suchithra Thangalazhy Gopakumar, Kasturi Muthoosamy and Nishanth Chemmangattuvalappil | Venue: MR 306
1058 – Effects of Scale-Up and Impeller Types on Spherical Agglomeration of Dimethyl Fumarate by Jen Yun Mo, Chih Wei Chen, Hung Lin Lee, Kuan Lin Yeh and Tu Lee | Reaction engineering and catalyst | Venue: BR 2
Session 12 – SDG Special Symposium (Virtual) | Venue: BR 2
1160 – Development of Carbon Dioxide and Hydrogen Sulphide Prediction Model for POME Treatment Using Machine Learning by Sara Kazemi Yazdi, Hung Yi Hia, Kashwin Selvanathan and Kishaan Ragu | Process system engineering | Venue: MR 302
1213 – Controlling the pH of prehydrated bentonite slurry containing acidic bio-based additive and its performance on filtration properties by Hannah Jane Cenita, Christian Niervo, Kristin Danielle Marie Florendo, Geri Marice Dela Rosa, Shiela Mae Amilbangsa and Jonathan Jared Ignacio | Oil, gas & petrochemicals | Venue: MR 303
1228 – Enhanced sonocatalytic degradation of Congo Red by using oil palm empty fruit bunch-derived cellulose/silver doped on titanium dioxide composite by Chai Yi Ding, Pang Yean Ling, Steven Lim, Woon Chan Chong, Lai Chin Wei and Abdullah Ahmad Zuhairi | Venue: MR 306
1060 – Unconventional Separation of Arsenic Trioxide from Unused Aqueous Chemotherapeutic Agents by Direct Evaporative Crystallization by Yu Kun Peng, Dhanang Edy Pratama, Wen Chen Hsieh, Kuan Yun Lin, Yu-Yung Chen, Chun Chou Lin, Yu Fang Hu and Tu Lee | Reaction engineering and catalyst | Venue: BR 2
1069 – Hydrophobic eutectic solvents for sustainable cathode recycling of lithium-ion batteries by Takafumi Hanada and Masahiro Goto | Cleaner production and circular economy | Venue: MR 305
1163 – Investigation of the effect of Variable Inlet Guide Valve Drift, Fouling and Erosion on Three shaft Gas Turbine Performance by Waleligne Molla Salilew, Zainal Ambri Abdul Karim and Tamiru Alemu Lemma | Process system engineering | Venue: MR 302
1232 – Investigation of Jatropha-Based Inhibitors on Penara Waxy Crude Oil Apparent Viscosity by Amni Haslinda Alpandi, Hazlina Husin and Akhmal Sidek | Oil, gas & petrochemicals | Venue: MR 303
1229 – Characterization of Malaysian Jatropha Seed Oil and Discovering Process of Powdered Jatropha Leaves by Amni Haslinda Alpandi, Hazlina Husin and Akhmal Sidek | Chemical engineering fundamentals | Venue: MR 306
1068 – Coil-shaped rotating spiral gas-solid reactor – design procedure for catalytic reaction by Tadaaki Shimizu, Liuyun Li, Heizo Kato, Akimichi Hatta and Toshinori Kojima | Reaction engineering and catalyst | Venue: BR 2
1197 – Centella asiatica L. extract as green corrosion inhibitor for low carbon steel under tropical seawater condition by Mike Jayson Maquidang, Alyssa Mae Alib, Eken Zoe Calooy, Dave Anthony Villasista, Jayson Santos, Jonathan Jared Ignacio and Shiela Mae Amilbangsa | Cleaner production and circular economy | Venue: MR 305
1180 – An Optimal Decarbonisation Policymaking Software Framework Inspired by Process Integration by Purusothmn Nair S Bhasker Nair, Dominic C.Y. Foo, Raymond R Tan and Michael Short | Process system engineering | Venue: MR 302
1215 – Microwave-Assisted Catalyst- and Additive-Free Multicomponent Synthesis of Diverse Bipyridines and their Heavy Metal Sensing Properties using Biorenewable and Safe Dipolar Aprotic Solvent by Ramuel John Inductivo Tamargo | Reaction engineering and catalyst | Venue: MR 303
1230 – A novel predictive model for the design of fragrant molecules using rough set-based machine learning by Shie Teck Tiew, Nishanth Chemmangattuval, Jia Wen Chong, Raymond Tan, Kathleen Aviso, Yick Eu Chew, Ho Yan Lee and Yi Peng Heng | Process system engineering | Venue: MR 306
1074 – ADDITION OF 3-AMINOPROPYLTRIETHOXYSILANE AS AN ADDITIVE IN IMPROVING QUALITY OF LATEX GLOVE by Noorashikin Saleh, Gagenthiran Ganesan and Nik Nur Atiqah Nik Wee | Reaction engineering and catalyst | Venue: BR 2
1112 – Optimal operating conditions for high quality tomato cultivation in plant factories in hot and humid regions of Asia by Seiji Matsuo, Chiharu Tokoro and Yasunaga Iwasaki | Process system engineering | Venue: BR 2
1135 – Ensemble machine learning to predict the selectivity from 3D information of π-pocket catalysts by Kazuhiro Takeda and Makoto Yasuda | Process system engineering | Venue: BR 2
1151 – Demonstration of the effectiveness of the separation technique of lithium-ion battery cathode materials using the electric pulse method for efficient separation by Kaito Teruya, Taketoshi Koita, Takao Namihira and Chiharu Tokoro | Cleaner production and circular economy | Venue: BR 2
1183 – Rational Design and Fabrication of Copper@Polypyrrole Nanowires Aerogels for Piezoresistive Pressure Sensing by Wei Wang and Yuxin Zhao | Nanotechnology and advanced materials | Venue: BR 2
1156 – Solid-Liquid Equilibria of Ternary System Ethanol + Diethyl Carboanate + Diphenyl Carbonate by Hiroyuki Matsuda, Yuki Ohashi, Shoki Takamatsuya, Keiji Kawai, Kiyofumi Kurihara and Katsumi Tochigi | Chemical engineering fundamentals | Venue: MR 305
Ensuring Business Continuity in Water Stressed Conditions | Venue: MR 302
1154 – A mechanistic model based approach with on-line monitors for accelerated food drying process development by Shuichi Yamamoto | Bioproducts, food and bioprocessing | Venue: MR 303
1167 – OPTIMISATION STRATEGY TO ACHIEVE NET-ZERO IN PALM OIL SECTOR VIA CIRCULAR ECONOMY MODEL by Jason Zhao Hong Hwang, Viknesh Andiappan and Denny K. S. Ng | Sustainable palm oil | Venue: MR 306
1184 – Economic and correlation analysis of parabolic trough collector (PTC) system in Malaysia, China and United States by Weng Pin Wong, Rashmi Walvekar, Mohammad Khalid and Mahesh Vaka | Process system engineering | Venue: BR 1
1078 – Effects of Temperature and Gas Partial Pressure on Chemical Vapor Deposition Process of Bismuth-based Perovskite Thin Film by Ziguang Yang, Keito Togami and Motoaki Kawase | Reaction engineering and catalyst | Venue: BR 2
1214 – Simulation and Experimental Validation of Trace Gas Leakage Detection by Acoustic Method by Szu-Han Chou, Chong Wei Ong and Cheng-Liang Chen | Process system engineering | Venue: MR 305
1212 – Integrating Aspen Plus and life cycle assessment (LCA) study of photocatalytic, thermocatalytic dry methane reforming and biomass gasification toward syngas generation by Xin-Quan Tan and Wee-Jun Ong | Cleaner production and circular economy | Venue: MR 302
1208 – High-throughput formulation screening methods for prediction of protein stability by Kam Yenh Hua, Paul Matejtschuk, Meenu Wadhwa, Sarah Hedberg and Daryl Williams | Bioproducts, food and bioprocessing | Venue: MR 303
1025 – Synthesis and characterization of lignin incorporated carboxymethyl cellulose (CMC) films from oil palm lignocellulosic waste by Cai Li Song and Jofry B Othman | Sustainable palm oil | Venue: MR 306
1198 – AI-CFD Modeling for Chemical Vapor Dispersion in Laboratory by Xu Zhang and Ban Zhen Hong | Process system engineering | Venue: BR 1
1102 – Comparative study on the oxidation of manganese ions by sodium hypochlorite and potassium permanganate under low pH conditions by Mauricio Córdova Udaeta, Cheng Bowen, Shigeshi Fuchida, Yutaro Takaya, Jun Horiuchi, Hiroyuki Masuoka, Keishi Oyama and Chiharu Tokoro | Reaction engineering and catalyst | Venue: BR 2
1157 – Prediction of Phase Equilibria and Transport Properties Using ASOG and PRASOG Group Contribution Methods by Katsumi Tochigi, Hiroyuki Matsuda and Kiyofumi Kurihara | Chemical engineering fundamentals | Venue: MR 305
1234 – Microbial and Enzymatic Degradation for Biohydrogen Production by Bacillus sp. & Cereibacter sp. by Eldon Chung Han Chua, Siaw Khur Wee, Sie Yon Lau, Jibrail Kansedo, Sharul Dol, King Hann Lim and Anuj Nishanth Lipton | Cleaner production and circular economy | Venue: MR 302
1168 – Application of Graphene Oxide-Silica Xerogel for the Continuous Removal of Crystal Violet Dye by Nicholas Yung Li Loh, Billie Yan Zhang Hiew, Svenja Hanson and Lai Yee Lee | Reaction engineering and catalyst | Venue: MR 303
Strategic Maintenance Matters Towards Sustainability | Venue: MR 306
1200 – Investigation of Ammonia Water Evaporation Rate via Molecular Dynamics Simulation by Tan Wei Jian and Ban Zhen Hong | Process system engineering | Venue: BR 1
1127 – TECHNO-ECONOMIC COMPARISON OF DIFFERENT REACTOR TYPES USED IN THE MANUFACTURE OF FRUCTOOLIGOSACCHARIDES FROM SUCROSE by Treerat Vacharanukrauh | Reaction engineering and catalyst | Venue: BR 2
Design of CO2 Geosequestration Compression Systems | Venue: MR 305
Honeywell – Pathways to a Net Zero Future | Venue: MR 302
1176 – Kinetic modelling of hydrogen peroxide concentration dosed to degrade sulphamethoxazole by UV/H2O2 by Jose Maria Lomas, Natalia Villota and Andrea Guevara | Reaction engineering and catalyst | Venue: MR 303
1121 – OPTIMIZATION OF FED-BATCH BAKER’S YEAST FERMENTATION USING DEEP REINFORCEMENT LEARNING by Wan Ying Chai, Heng Jin Tham, Kenneth Tze Kin Teo and Min Keng Tan | Process system engineering | Venue: MR 306
1204 – Predictive Capability of Artificial Neural Network in n-Butene Skeletal Isomerization over Hierarchical ZSM-35 Zeolite by Han Wei Beh | Process system engineering | Venue: BR 1
1139 – Risk assessment of nickel compounds based on Daphnia magna assay by Tatsuo Abe | Reaction engineering and catalyst | Venue: BR 2
1241 – Approaching Practically Accessible and Environmentally Adaptive Sodium Metal Batteries with High Loading Cathodes through In-Situ Interlock Interface by Ya-Nan Zhou | Reaction engineering and catalyst | Venue: BR 1
1242 – Fabrication and modification of high performance sulfonated aromatic polymer membrane for pervaporation desalination by Mengyu Yan, Na Li and Weiyu Shen | Reaction engineering and catalyst | Venue: BR 2
1118 – Encapsulation of Alpha-Mangostin into Chitosan-Oleic Acid Complexes: An Attempt to Improve Its Stability and Oral Bioavailability by Anchali Kalidason and Takashi Kuroiwa | Bioproducts, food and bioprocessing | Venue: MR 305
1195 – Parametric studies on DME carbonylation to MA in a fluidized bed reactor by Woo Chang Sung, Hyun Seung Jung, Jun Young Kim, Jong Wook Bae and Dong Hyun Lee | Reaction engineering and catalyst | Venue: MR 302
1114 – Digitalization for Sustainable Water Management in Petroleum Production and Processing Facilities by Siti Norzamiah Nadzmi, Mardhiyah Mohd Bakir and Irene Lock Sow Mei | Waste treatment and management | Venue: MR 303
1187 – Greener production of carbon nanotubes and battery applications by Suguru Noda, Heng Yi Teah, Mochen Li, Kentaro Kaneko, Yuichi Yoshie and Tomotaro Mae | Cleaner production and circular economy | Venue: MR 306
1126 – Effect of steam and wash treatment on the property of composite made from date palm residue and PLA by Chengyu Xie, Yoko Kurokochi, Yukie Saito and Mitsuo Yamamoto | Waste treatment and management | Venue: BR 1
1140 – Carbon Dioxide Recovery from Air by a Conductively Heated and Cooled Temperature Swing Adsorption Packed with an Amine based Solid Adsorbent by Heak Vannak, Yugo Osaka, Takuya Tsujiguchi and Akio Kodama | Reaction engineering and catalyst | Venue: BR 2
1124 – Control of Adhesion property of Mussel Foot Protein by Fusing Soluble Protein by Anju Pilakka Veedu, Kazunori Nakashima, Takahiro Sato and Satoru Kawasaki | Bioproducts, food and bioprocessing | Venue: MR 305
1205 – Effect of pH on changes in color during sulphamethoxazole oxidation by UV/H2O2 by Jose M. Lomas, Natalia Villota and Sebastien Jankelevitch | Reaction engineering and catalyst | Venue: MR 302
1169 – Removal of Organic Water Pollutants using Functionalised Graphene Oxide Adsorbents by Wan Ting Tee, Suchithra Thangalazhy-Gopakumar, Suyin Gan and Lai Yee Lee | Waste treatment and management | Venue: MR 303
1072 – Evaluation of recycled carbon fiber recovered by chemical decomposition from CFRP using nitric acid treatment by Asuka Sakai, Winarto Kurniawan, Masatoshi Kubouchi, Mitsuhiro Inui, Atsushi Mizutani and Taro Kuroda | Cleaner production and circular economy | Venue: MR 306
1051 – Electrochemical Characteristics of Solid-state Lithium Metal Batteries Based on PEBAX Electrolyte by Changlin Liu, Abuliti Abudula and Guoqing Guan | Nanotechnology and advanced materials | Venue: BR 1
1141 – Electrochemical cell design and performance evaluation of polyvinyl ferrocene/carbon nanotube electrodes for selective formate separation by Sevgi Polat, Ruud Kortlever and H. Burak Eral | Reaction engineering and catalyst | Venue: BR 2
1129 – Development of Flow-through Microwells Made of Porous Materials for Perfusion Culture of Mammalian Cells by Mai Takagi, Masumi Yamada, Rie Utoh and Minoru Seki | Bioproducts, food and bioprocessing | Venue: MR 305
1210 – Modulating of non-noble metal semiconductors for solar/electro-to-chemical conversion: Bridging atomic-level insights with experimental analysis by Wee-Jun Ong | Reaction engineering and catalyst | Venue: MR 302
1202 – Optimizing Viability of Urban-Industrial Wastewater Management Strategies via P-graph by Joshua Bon Roco and Arnel Beltran | Waste treatment and management | Venue: MR 303
1110 – Consumer willingness for introducing paper bags made from agricultural waste in Egypt by Mitsuo Yamamoto, Sara Tanaka and Takeshi Sato | Cleaner production and circular economy | Venue: MR 306
1066 – Preparation and mechanical properties of a graphite nanosheet/nylon 610 nanocomposite using graphite nanosheets treated with supercritical water by Jun-Ven Lim, Soo-Tueen Bee and Tin Sin Lee | Nanotechnology and advanced materials | Venue: BR 1
1185 – Study on High Temperature Hydrothermal Resistant Mn-Based Catalysts for Catalytic Oxidation of Ethyl Acetate by Sim Ley Boon, Fu Jile and Chen Binghui | Reaction engineering and catalyst | Venue: BR 2
1142 – Co-assembly with peptide amphiphiles through complementary hydrogen bonding facilitates non-endocytic cellular internalization of small molecules by Hiroki Obayashi, Rie Wakabayashi, Noriho Kamiya and Masahiro Goto | Bioproducts, food and bioprocessing | Venue: MR 305
1211 – Surface active-site engineering of N-rich carbon nitride allotropes for catalytic H2 production in acidic and alkaline media by Sue-Faye Ng and Wee-Jun Ong | Reaction engineering and catalyst | Venue: MR 302
1207 – Application of spherical fuzzy analytic hierarchy process (SFAHP) in treatment technology selection for acid mine drainage (AMD) by Cyrielle Lorio, Einstine Opiso, Vannie Joy Resabal, Ivyleen Bernardo-Arugay, Joseph Ortenero, Arnel Beltran, Richard Alorro, Carlito Tabelin, Michael Angelo Promentilla and Aileen Orbecido | Waste treatment and management | Venue: MR 303
1152 – Development of a thermoelectric composite for sustainable energy-harvesting from recycled carbon fibre incorporated with CZTS by Phei Li Lau, Priyanka R. Jagadish, Yee Heng Ang, Grace Yeyen Chin, Yat Wai Loo, Jin Wei Yap, Mohammad Khalid Siddiqui and Andy Chan | Cleaner production and circular economy | Venue: MR 306
1067 – Fabrication and conductivity of a graphite nanosheet/nylon 610 nanocomposite using graphite nanosheets treated with supercritical water by Jun-Ven Lim, Soo-Tueen Bee and Tin Sin Lee | Nanotechnology and advanced materials | Venue: BR 1
1194 – Rational design of the Ni catalyst for low temperature benzene hydroalkylation by Sen Zhao, Jianjun Li, Jile Fu and Binghui Chen | Reaction engineering and catalyst | Venue: BR 2
Converting Lab Results into Commercial Plant Success by a Proven Scale-Up Approach | Venue: MR 305
1199 – EFFECT OF TWO-POT HEAT TREATMENT ON FE-N-C/TI3C2 TOWARDS THE OXYGEN REDUCTION REACTION FOR FUEL CELL APPLICATION by Wai Yin Wong | Reaction engineering and catalyst | Venue: MR 302
1155 – Digitalization for Sustainable Water Management in Petroleum Production and Processing Facilities by Siti Norzamiah Nadzmi, Mardhiyah Mohd Bakir and Irene Lock Sow Mei | Waste treatment and management | Venue: MR 303
1179 – The overlooked potential of ultra-low temperature biochar by Svenja Hanson, Chengyu Wang and Qichuan Shi | Cleaner production and circular economy | Venue: MR 306
1090 – Synthesis of calcium peroxide nanoparticles with starch as biotemplate for the degradation of organic dye in aqueous solution by Nurul Nazihah Amerhaider Nuar, Siti Nurul Ain Md. Jamil and Thomas Shean Yaw Choong | Nanotechnology and advanced materials | Venue: BR 1
1240 – Formation of NOx for Metal Dissolution in Nitric Acid by Haruumi Takeda, Tsubasa Takada, Erika Okita, Takafumi Horie and Masahiro Yasuda | Reaction engineering and catalyst | Venue: BR 2
1037 – Honeycomb Tubular Biochar Derived from Palm Leaves as a Potential Adsorbent for VOCs Removal by Fanthagiro Rossi Stuard Majing, Yen San Chan, Inn Shi Tan, Yie Hua Tan and Mohd Dinie Muhaimin Samsudin | Reaction engineering and catalyst | Venue: MR 302
1236 – Potential Application of Silica Aerogel in Treating Methylene Blue in Wastewater by Billie Yan Zhang Hiew, Wan Ting Tee, Nicholas Yung Li Loh and Lai Yee Lee | Waste treatment and management | Venue: MR 303
1260 – Drying Characteristics and Energy Efficiency of Heat Pump Dryer for Industrial Electroplating Sludge Drying by Yen Wei Chin and Sze Pheng Ong | Process system engineering | Venue: MR 306
Workshop 1 – Fluid flow, pressure drop & hydraulic analysis
1041 – Synthesis and Characterization of Diethylene Glycol Dioleate as Biolubricant Base by Noor Azeerah Abas, Noor Khairin Mohd and Haliza Abdul Aziz | Reaction engineering and catalyst
1065 – Machine Learning Method for Determining Chemical Vapor Deposition Conditions for Large-area Graphene Growth by Naoki Yoshihara, Yuya Tahara and Masaru Noda | Process system engineering
1053 – Impact of Tryptophan on the formation kinetics of carbon dioxide hydrates for hydrate-desalination by Muhammad Saad Khan, Amirun Nissa Rehman, Bhajan Lal, Iqbal Ahmed, Hani Abulkhair, Azmi Mohd Shariff, Abdulmohsen Alsaiar, Eydhah Almatrafi and Omar Bamaga | Reaction engineering and catalyst
1084 – Sub- and supercritical hydrothermal synthesis of Y3Al5O12 nanoparticles doped with rare earth elements by Seiichi Takami and Xiaoqian Zhao | Nanotechnology and advanced materials
1119 – A reduced temperature solid oxide fuel cell with nanostructured electrodes by Yuying Jiang, Bo Cheng and Zhan Gao | Nanotechnology and advanced materials
1056 – Non-catalytic esterification of palm fatty acid distillate with 2-ethyl hexanol for high purity production of biolubricant ester by Nik Nurfatmah Pz Binti Nik Pauzi | Reaction engineering and catalyst
1243 – A Graphene-Coated Thermal Conductive Separator to Eliminate the Dendrite-Induced Local Hotspots for Stable Lithium Cycling by Han Duzhao | Reaction engineering and catalyst
1057 – Recyclable Positive Azeotropes for the Purification of Curcumin with Optimum Purity and Solvent Capacity by Tu Lee, Jia De Tseng, Hung Lin Lee and Kuan Lin Yeh | Reaction engineering and catalyst
1178 – Complete removal of CO at ambient conditions using copper manganese oxide (CuMnOx) catalysts synthesised via co-precipitation with ultrasonic irradiation by Joyce Tiong, Thomas C. K. Yang and Yeow Hong Yap | Reaction engineering and catalyst
1172 – Techno-economic Comparison of Different Reactor Types Used in the Manufacture of Fructooligosaccharides from Sucrose by Treerat Vacharanukrauh and Apinan Soottitantawat | Bioproducts, food and bioprocessing
1251 – Zwitterionic Covalent Organic Frameworks: Attractive Porous Host for Gas Separation and Anhydrous Proton Conduction by Yu Fu | Reaction engineering and catalyst
1231 – Recovery of Active Pharmaceutical Ingredients from Unused Solid Dosage Form Drugs by Dhanang Edy Pratama, Wen-Chen Hsieh, Ahmed Elmaamoun, Hung Lin Lee and Tu Lee | Bioproducts, food and bioprocessing
1186 – Life cycle assessment and techno-economic analysis on mixed matrix membranes for CO2 capture by Wei Hang Desmond Goh, Hui Shen Lau and Wai Fen Yong | Cleaner production and circular economy
1013 – Novel Approach for the Characterization of Powder Caking by Alessandra Hausmann, Britta Buck, Tom Simons and Daryl Williams | Bioproducts, food and bioprocessing
1218 – Application of INVS DEMATEL in Health, Safety, Environment, and Ergonomic Assessment of Tire Manufacturing Industry During COVID-19 Pandemic by Allian Peñaranda, Selina Khae Montederamos, Trisha Anne Bautista, Marc Joshua Salazar, John Cedric Pascual, Roy Alvin Malenab and Jonathan Jared Ignacio | Process safety and loss prevention
1122 – Domestic woodchips and imported PKS for the future of power generation in Japan. A Life Cycle Analysis of Malaysian Palm Kernel-Shells for Biomass-derived Power generation in Japan by Disni Gamaralalage, Yuichiro Kanematsu, Denny Ng, Steve Foong, Viknesh Andiappan, Dominic Foo and Yasunori Kikuchi | Sustainable palm oil
1091 – Reduction of various metal ions by low-grade carbonaceous resources at a low temperature for chemical energy conversion by Takuya Minamiguchi, Yuta Mizutani, Ryuichi Ashida and Motoaki Kawase | Reaction engineering and catalyst
1087 – Design and Techno–Economic Analysis of Levulinic Acid Production Process from Biomass by Using Co-product Formic Acid as a Catalyst with Minimal Waste Generation by Ryu Ukawa-Sato and Chihiro Fushimi | Reaction engineering and catalyst
1130 – Effect of temperature and time on empty fruit bunches (EFB) and oil palm trunks (OPT) derived hydrochar for biofuel production: A comparison by Frederick Jit Fook Phang, Jiuan Jing Chew, Bing Shen How, Nishar Hameed, Soh Kheang Loh, Suzana Yusup and Jaka Sunarso | Sustainable palm oil
1147 – A Techno-Economic Assessment of the Newly Waived Off-grid Areas in the Philippines by John Larry Corpuz, Michael Castro and Joey Ocon | Process system engineering
1209 – Review on the present state of the palm oil milling process and potential oil extraction rate (OER) enhancement methods by Amer Said Ismail and Tan Ping | Sustainable palm oil
1244 – Packing sulfur species by phosphorene-derived catalytic interface for electrolyte-lean lithium–sulfur batteries by Jiangqi Zhou, Aiyue Sun and Duzhao Han | Reaction engineering and catalyst
Sustainable Practices in a Palm Oil Refining Complex
1245 – Confinement of Pt NPs by Hollow-Porous-Carbon-Sphere via Pore Regulation with Promoted Activity and Durability in Hydrogen Evolution Reaction by Zhuofan Gan and Wei Tang | Reaction engineering and catalyst
1247 – Integrated Leaching and Selective Recovery of Cobalt Using an Amino Acid-Based Aqueous Biphasic System from Spent Lithium-ion Batteries by Chunqing Cai, Adroit T.N. Fajar, Takafumi Hanada and Masahiro Goto | Cleaner production and circular economy
1246 – A Universal Strategy For N-Doped 2D Carbon Nanosheets With Sub-Nanometer Micropore For High-Performance Supercapacitor by Zichun Xiao | Nanotechnology and advanced materials
Workshop 2 – Economics of Industrial Decarbonisation
1071 – Investigation of Glyphosate Removal from Aqueous Solution by Calcium Peroxide Nanoparticles by Fan Li, Thomas Shean Yaw Choong, Luqman Chuah Abdullah and Siti Nurul Ain Md. Jamil | Nanotechnology and advanced materials
1063 – A novel approach to estimate the solubilities of non-steroidal anti-inflammatory drugs (NSAIDs) in supercritical carbon dioxide by PC-SAFT equation of state by Mahmoud Magdy Azim, Ikuo Ushiki, Azusa Miyajima and Shigeki Takishima | Bioproducts, food and bioprocessing
Recent Advances in Decarbonization Alternatives
1237 – Reinforcement Learning Control with Deep Deterministic Policy Gradient Algorithm for Multivariable pH Process by Chanin Panjapornpon, Patcharapol Chinchalongporn, Santi Bardeeniz, Ratthanita Makkayatorn and Witchaya Wongpunnawat | Process system engineering
1086 – Effect of supercooling phenomenon on liquid freezing in cylindrical vessel by Taiga Nakazaki, Yuichiro Akimaru, Hiroyuki Iyota and Hayato Masuda | Reaction engineering and catalyst
1073 – Degradation behaviors of SOFC by the deposition of potassium compounds on the anode surface by Hui Zhang, Ryo Yoshiie, Ichiro Naruse and Yasuaki Ueki | Reaction engineering and catalyst
1206 – An Insight into Sustainable Circular Bioeconomy for Farm Management using Black Soldier Fly Larvae (BSFL) by Teck Ann Yeow and Jian Ping Tan | Cleaner production and circular economy
1132 – Effect of Polymer Addition on Dynamic Leidenfrost Phenomenon by Koki Wada, Ryosuke Sakurai, Shinichiro Okumura, Hayato Masuda and Hiroyuki Iyota | Reaction engineering and catalyst
1238 – Two-stage Deep Learning Fault Detection and Identification for Vinyl Chloride Monomer Process with Aberrant Measurements by Chanin Panjapornpon, Patamawadee Chomchai, Santi Bardeeniz and Nanthasit Aiamsaartsri | Process system engineering
1145 – Self-assembled peptide fibers with enzymatic reactivity for potential delivery of biotherapeutics by Rie Wakabayashi, Ayato Higuchi, Masahiro Goto and Noriho Kamiya | Bioproducts, food and bioprocessing
1039 – CO2 Adsorption Using Accelerated Weathering of Limestone for Cement Industry Gas Emission by Slyvester Chai, Lock Hei Ngu and Bing Shen How | Cleaner production and circular economy
END OF CONFERENCE
The Institution of Engineers, Malaysia
E APCChE2022@gmail.com
W www.apcche2022.org
T +60(3) 7968 4001/4002
F +60(3) 7957 7678